To associate a reference sequence with the assembly use one of the following ways:

  1. Open the sequence (the sequence must be loaded) and drag it to the Assembly Reference Area:

    <center>
         <br>
         <img src="/wiki/download/attachments/17467682/Associating Reference Sequence.png"/>
         <br>
    </center>
  2. Use the corresponding toolbar button:

    <center>
         <br>
         <img src="/wiki/download/attachments/17467682/Associating Reference Sequence_1.png"/>
         <br>
    </center>
  3. Use the corresponding context menu item:

    <center>
         <br>
         <img src="/wiki/download/attachments/17467682/Associating Reference Sequence_2.png"/>
         <br>
    </center>

The reference sequence will appear in the Reference Area:

<center>
     <br>
     <img src="/wiki/download/attachments/17467682/Associating Reference Sequence_3.png"/>
     <br>
</center>

To remove the association, select the Unassociate item in the Reference Area context menu.